OUR PRODUCTS

Quality perspective for all your projects

Slider

Minermanto

MINERMANTO; cement-based, natural minerals supported surfaces containing polymer (gas concrete, bims, exposed concrete, glass, gypsum board, PVC, cement board, plaster, oily painted surfaces, steel construction, galvanized metal surfaces, old buildings and tile surfaces, etc.) with a steel trowel. It is a very strong adherence enhancing putty that is applied with a thickness of 3-4 mm, and then combed parallel to the floor with a notched trowel to make it suitable for HORASAN PLUS thermal insulation plaster.

APPLICATION;

The application surface should be free from dust, dirt, detergent, etc. It should be free of substances that prevent holding. Surface defects should be repaired before application and highly absorbent surfaces should be moistened. With an average of 7-8 liters of water and 25 kg of Minermanto paste, preferably with a low-speed mixer or trowel, for about 3 minutes. It must be mixed. The mixture should have a pasty consistency. After the prepared paste is rested for approximately 5 minutes, the mortar prepared is maximum 30 minutes. must be used within. Minermanto putty should be pressed on the application surface with a steel trowel and notched parallel to the floor. Putty application thickness should be in the range of 3-4 mm depending on the condition of the surface. Horasan Plus thermal insulation plaster application can be started 1-2 after application, depending on the weather conditions.